Ejaz Ahmed
F225, Street No 5,,Textile Avenue, S.I.T.E.,,Karachi,75700
Pakistan
COMPLETE DENIM DYEING AND FINISHING INSTALLATION
REF : VCC-3602 INDIGO DYEING RANGE (SUCKER MULLER)
INDIGO DYEING RANGE SUCKER MULLER, ROLLER WIDTH 1800 MM, BEAM DIAM. 1400 MM. YEAR OF THE INSTALLATION 1980, REFURBISHED IN 2000.
COMPRISING OF THE FOLLOWING:
- FEEDING CREEL MODEL ANP-12, WITH BEAM PNEUMATIC BRAKE.
- 8 DYEING TANKS IN STAINLESS STEEL WITH MEASUREMENT AND TEMPERATURE CONTROL, PADDER PRESSURE UP TO 10 TN AND ROLLERS IN STAINLESS STEEL.
- 3 WASHING TANKS IN SS WITH THE SAME FEATURES BUT SEVERAL CAPACITY.
- 8 DYEING TANKS HAVE A NATURAL OXIDATION SYSTEM.
- PREDRYING BY 8 DRUMS WITH TEMPERATURE CONTROL, ALLOWING TO DRY THE THREAD BEFORE GLUEING.
- SIZING UNIT WITH ONE INTERMEDIATE PADDER AND ONE FINAL AND PASTE MACHINE WITH ENTRY THAT ALLOWS TWO SEPARATE LAYERS FOR A BETTER GLUEING.
- DRYING BY 10 DRUMS WITH TEMPERATURE CONTROL.
- LIQUID WAXING BY A LIQUID WAX SYSTEM AT DRYER DRUMS EXIT.
- ACCUMULATION UNIT TO ALLOW NON-STOP 100 M CAPACITY APPROX.
- STOCKHEAD MODEL WN, WITH OPENING BARS AND COMB TO REGULATE WIDTH AND THREAD DISTRIBUTION IN FOLDER WITH A MAXIMUM WIDTH OF 2000 MM.
REF : VCC-3515 INDIGO DYEING RANGE (SUCKER MULLER)
INDIGO DYEING RANGE SUCKER MULLER, ROLLER WIDTH 1800 MM, BEAM DIAM. 1400 MM. YEAR OF THE INSTALLATION 1987, REFURBISHED IN 2001. COMPRISING THE FOLLOWING:
- FEEDING CREEL MODEL ANP-12, WITH BEAM PNEUMATIC BRAKE.
- 8 DYEING TANKS IN STAINLESS STEEL WITH MEASUREMENT AND TEMPERATURE CONTROL, PADDER PRESSURE UP TO 10 TN AND ROLLERS IN STAINLESS STEEL.
- 3 WASHING TANKS IN SS WITH THE SAME FEATURES BUT SEVERAL CAPACITY.
- 8 DYEING TANKS HAVE A NATURAL OXIDATION SYSTEM.
- PREDRYING BY 8 DRUMS WITH TEMPERATURE CONTROL, ALLOWING TO DRY THE THREAD BEFORE GLUEING.
- SIZING UNIT WITH ONE INTERMEDIATE PADDER AND ONE FINAL AND PASTE MACHINE WITH ENTRY THAT ALLOWS TWO SEPARATE LAYERS FOR A BETTER GLUEING.
- DRYING BY 10 DRUMS WITH TEMPERATURE CONTROL.
- LIQUID WAXING BY A LIQUID WAX SYSTEM AT DRYER DRUMS EXIT.
- ACCUMULATION UNIT TO ALLOW NON-STOP 125 M CAPACITY.
- STOCKHEAD MODEL WN, WITH OPENING BARS AND COMB TO REGULATE WIDTH AND THREAD DISTRIBUTION IN FOLDER WITH A MAXIMUM WIDTH OF 2000 MM.
REF : VCC-3225 INSTALLATION DENIM FINISHING (MORRISON)
MORRISON DENIM FINISHING INSTALLATION, YEAR 1980, ROLLER WIDTH 1900 MM.
COMPRISING OF:
ENTRY WITH J BOX FOR A-FRAME CHANGE, REDIRECTING CYLINDERS SET FOR WEFT
SQUEEZING PADDER PRESSURE 10 TN
FITE SINGEING MACHINE YEAR 2001 ON LINE WITH 2 DRUM TOWERS
CLIP STENTER FRAME
SANFOR MORRISON
PALMER CYLINDER, 2 COOLING CYLINDERS
EXIT BY TESTA CONVEYOR YEAR 2001
ALLOWING FABRIC ACCUMULATION WITHOUT TENSION FOR A-FRAME CHANGE. LOFT FOR PRODUCT PREPARING AND TANK FOR CONDENSED RECOVERY.
REF : VCC-3600 WARPER (DIRECT) (HACOBA)
HACOBA DIRECT WARPING MACHINE MODEL BMS-1250-E, CAN WARP DIFEFRENT WIDTHS OF WARP BEAMS BETWEEN 1400 MM AND 2100 MM, FLANGES UP TO 1400 MM DIAM. YEAR 1988.
HACOBA CREEL H TYPE WITH 450 ENDS EACH, PITCH 330 MM.
REF : VCC-3601 WARPER (DIRECT) (HACOBA )
HACOBA DIRECT WARPING MACHINE MODEL BMS-1400-E, CAN WARP DIFEFRENT WIDTHS OF WARP BEAMS BETWEEN 1400 MM AND 2100 MM, FLANGES UP TO 1400 MM DIAM. YEAR 1991.
HACOBA BENNINGER CREEL H TYPE WITH 650 SPACING SPINDLES, 230 MM.
Nearest airport : Barcelona (Spain)
More photos available. Do not hesitate to contact us for further information.
http://twitter.com/inautex
INAUTEX S.A.
G.V. Carlos III, 53 E4
Barcelona 08028
Spain
Tel.: 0034 935399034 Fax: 0034 935398866
No comments:
Post a Comment